Copper

Understanding Propagation and Delay Skew in Cable Testing

Delay happens for all signals across all cable types, and propagation delay is the amount of time it takes for a transmitted signal to be received at the other end of the link or channel. The propagation delay in a twisted-pair copper cabling such as Category 6 or 6A is related to the nominal velocity of propagation (NVP), as well as the length of the cable and the operating frequency. You might remember from our previous blog on reading the top of a LinkWare™ report that NVP is used by your tester to calculate the length of the cable.

Sourced through Scoop.it from: www.flukenetworks.com

Categories: Copper, Testing

Tagged as: , ,

Leave a Reply