The global MPO Fiber Optic Connector market will grow by US$ 5 Billion by 2024 at a CAGR of 9.8% in the given forecast period driven by the rapidly increasing demand for a high bandwidth, among end users. The increasing adoption of mobile devices such as smartphones and tablets, and the growing adoption of 4G LTE network platforms provide numerous opportunities for growth.
Korea’s OptoNest has unveiled an optical MPO splitter that features an LC-type connector input and a 12-channel MPO connector as the output port. The splitter, which conforms to TIA/EIA 604-5 and IEC 61754-7 standards and is suitable for RoHS requirements, measures 82x12x8 mm and is designed to remove the chance of performance degradation from bending or folding of the optical fiber cable. The splitter is designed not to expose the fiber-optic cable in between. OptoNest is aiming the splitter at fiber to the home (FTTH) and 5G mobile network applications.
The one constant that holds true to all fiber optic connectors is the importance of the surface quality of the fiber optic connector end-face. Scratches, embedded dust particles and residues in the contact zone of a mated connector pair will disrupt the path through which the light travels, as it crosses out of the transmitting connector’s end-face into the receiving connector’s end-face. The best way to get optimal performance from fiber optic connections is to proactively inspect and clean both ends of a mated connector pair.
MPO technology and components are widely use in 40/100G network. However, to maintain the correct polarity in MPO systems is not always easy. Fortunately, there are approaches that can facilitate correct MTP/MPO polarity maintenance in serial duplex signals connections and parallel signals connections.
Panduit’s twisted-pair copper connectors meet the specifications of the IEEE 802.3bt standard for Power over Ethernet published in January 2019. That standard defines a maximum of 90 watts. While the standard itself is recently updated, Panduit’s certification to the higher loads has been in place since August 2016.
New user requirements and a steady demand for more capacity have created new test challenges across the optical network spectrum. These articles explore some of the more salient challenges as well as solutions, including the benefits of the right monitoring system, strategies for successful multi-fiber connectorization, and evolving data center test requirements.
MPO connectors are the most likely solution to migrate to 100, 200 and 400 Gb/s. If managers and contractors don’t use MPO or MTP® options and instead stick with LC connectivity, they’re going to end up limiting themselves to either long-reach transceiver applications for single mode, or some type of wave division multiplexing (WDM) technology. Getting started on using MPOs now will set organizations up for success, as higher speeds from 25 Gb/s to 400 Gb/s become the new norm.
The global Fiber Optic Connector Market is expected to reach USD 5.9 billion by 2025. Major factors driving growth include increasing bandwidth, rising demand for data volume and transmission speed in data centers within the telecommunication industry. Additionally, rising application of fiber optic connectors in a gamut of application areas within the medical and pharmaceutical sector
Sumitomo Electric and Senko have partnered on new AirMT multi-fiber optical connectors which offer an alternative to physical contact multi-fiber optical connectivity, as found in such formats as MPO connectors. AirMT connectors eliminate the problem with traditional MPO connectors, which require high spring force to achieve physical contact for MT-to-MT ferrules, and suffer from high sensitivity to dust contamination.
Swick Designs’ new SWK Connector is a self-cleaning and self-protecting connector that accommodates polarity change with a single flip and boasts low-loss performance. A unique characteristic is the SWK’s rotating, covered Shield Shroud that cleans the ferrule endfaces and protects them from contaminants. Swick Designs says the Shield Shroud reduces debris and contaminants up to 98.99%.
